#CAMBAM CNC DRILLING FREE#

Used for spiral mill drilling and is the diameter of the hole required. True: The toolpaths associated with this machining operation are displayed and included in the gcode output False: The operation will be ignored and no gcode or tool paths will be produced for this operation. The unit of time measurementĭepends on the machine interpreter configuration and may be seconds or milliseconds. The time to pause at the bottom of the drill cycle. SpiralMill_CCW - Counter clockwise spiral toolpathĬustomScript - Uses the CustomScript property script SpiralMill_CW - Clockwise spiral toolpath

Method used to generate the drilling instruction. If True, then move toward or away from the center of the hole before retracting. This is the depth of cut for each loop of the spiral. The depth increment controls the pitch of the spiral toolpath if Drilling Method = Spiral Mill. Various macros can be used in this script which will be expanded by the post processor.

#CAMBAM CNC DRILLING FREE#

The clearance plane should be clear of the stock and any holding devices to allow free movement to any location.Ī multi-line gcode script that will be inserted into the gcode post after the current machining operation.Ī multi-line gcode script that will be inserted into the gcode post before the current machining operation.Ĭustom GCode script used for drilling if DrillingMethod=CustomScript The clearance plane (offset from the work plane). Used to create circular holes from selected point lists or circles.

Documentation for the latest CamBam release is available here.

Cambam cnc drilling